E-glass direct roving is made directly from a 2000 tip bushing or a 4000 tip bushing. Direct Rovings are primarily used in filament winding and pultrusion processes. Typical products are pultruded rod, pipe, tanks, woven roving and chemical resistant grating.Product CharacteristicsDirect Roving is made in one manufacturing step with a special reinforcement sizing. The glass fibers are bonded into a single strand. The tension of each glass fiber in the strand is uniform. There is low fuzz, quick wet out and excellent mechanical properties.
Technical Specifications
R2O Content 竊�.8%
Coupling Agent Silane
Compatible Resin polyester & Ethylene
Moisture Content ≤0.1%
LOI 0.55 ±0.2%
Filament Diameter 17~24 μm
Roving Properties & Polyester Rod Flexural Properties*Polyester Rod Flexural Strength (Std. condition) 1215 MPa
(GB/T 14208-1993) (Wet Condition) 1064 MPa
*Reference data only - not for technical specifications. Product Specifications*Product Code TEX Filament Diameter (mm) Applicable Process
EDR115-T921 1150 17 Weaving
EDR120-T910 1200 17 Filament Winding
EDR120-T911 1200 17 Pultrusion
EDR240-T910 2400 24 Filament Winding
EDR240-T911 2400 24 Pultrusion
EDR440-T910 4400 23 Filament Winding
EDR440-T911 4400 23 Pultrusion
EDR480-T910 4800 24 Filament Winding
EDR489-T911 4800 24 Pultrusion
*Special products are available according to customer's requirements. PackagingDirect Roving packages are wrapped in plastic bags. Roll diameter is 26 cm. Rolls are then packed in individual cardboard boxes or bulk packed. Each pallet of 110 cm by 110 cm can contain either 48 or 64 rolls. The weight of the 48-roll pallet is 768 kg. and the weight of the 64 pallet is 1024 kg.